Konya Tire Pressure Sensor Failure
TPMS (Tire Pressure Monitoring System) is a tire pressure monitoring system that can instantly check the value of in-vehicle tires and report it to the driver.
The system, which started production in 2006, has been used in many vehicles and has become mandatory in the European Union in 2014.
Tire Pressure Sensor, which is also widely available in vehicles sold in Turkey, provides a great advantage in preventing accidents.
Year 2014 and later, generally all vehicles have TPMS sensors. These sensors, which provide the user with a balanced drive, provide the opportunity to save fuel.
Tire manufacturers' fearful dream TPMS malfunction has become widespread today. In some vehicles, TPMS Sensor failure does not work in some vehicle groups, although the fault light is reset on the indicator.
Generally, it is recommended to check the tire pressure when the TPMS Sensor fails.
The TPMS fault light may turn off after moving 3–4 kilometers. If the TPMS fault light still does not go out, the TPMS Sensor on the tire may be defective.
With the AutelTS508 device developed by AUTEL, these controls can be performed properly, as well as new TPMS Sensor coding.
How to encode and calibrate the TPMS sensor?
The Tpms sensor is located in the tire pressure valve or rim. These sensors communicate with the electronic control unit.
There is a battery inside the Tpms sensor. The sensor in each vehicle can be used for an average of 5 years, and the sensor must be replaced and coded after 5 years.
In this case, Autel MX Sensor stands out with its successful performance.
In addition to battery life, the sensor may malfunction for different reasons and may need to be replaced.
The TPMS sensor has not been repaired and must be replaced. Before making changes, the ID information must be read from the old TPMS sensor and then transferred to the new sensor.
After these operations, direct failure may not disappear. The calibration and adaptation process must be completed.
If you want to get information about the tire pressure sensor or a different subject; You can reach us at 0850 755 02 30 and get information on Nitro Mekatronik Forums Page.