How to Perform Magnetic Sensor Test with the Conjector Tester?
Tuesday, August 25, 2020

How to Perform Magnetic Sensor Test with the Conjector Tester?

Nitro Mekatronik, which has proved itself in the field of vehicle fault detection devices, has increased its target day by day and started to produce domestic productions such as Conjector test device in the automotive field.

The ecu tester of the company, whose R&D phase has been completed successfully and is used to detect malfunctions in the engine control unit, is the ECUTEST device.

Nitro Mekatronik, which then introduces the Conjector test device, which is all domestic production, to the market, takes firm steps in the automotive sector.

The content of the Conjector tester, which is offered on the market and is very simple to use, is quite extensive. Conjector tester You can successfully test the magnetic sensors of many vehicles such as BMW, Mercedes-Benz, PSA group, VAG group. In addition, the device with a wide connector coverage supports terminals such as COM (LIN BUS), RLO, SIG, P-D, C, L / D +, RVC.

Conjector tester allows you to test magnetic sensors such as Crank and Eccentric. With the diagrams inside, you can easily make connections and perform sensor and connector tests easily.

Since you can monitor instant data on the screen of the device, you can easily find faults in the sensor or the connector without having to be on the vehicle.

After making the necessary connection for the connectors, you can check the bottom corner of the screen to see if the part is defective.

To find out if the magnetic sensors are malfunctioning, it will be sufficient to touch the sensor with a metal piece after connecting the sensor to the device.

If the sensor is working, the device will give an audible warning, if it is defective, the device will not react in any way.

Nitro Mekatronik Automotive has made a name for itself in the domestic market with its fault detection devices and solutions in vehicle electronics.

In addition, the company also signals that it will continue its R&D studies rapidly.

Nitro Mechatronics Company works day and night to close the gaps in the sector. It seems that it will affect every workshop with the devices it imports and the devices such as ECUTEST and Conjector test device.



Leave your comment