Alientech KESS3 Multiwire Bench/Boot Cable — 144300KBNC

• Alientech 144300KBNC is the original multi-connection cable used to connect the KESS3 tool directly to ECU and TCU control units.
• It enables reliable communication with the control unit in KESS3 Bench and Boot modes. In Bench mode it is used via the ECU/TCU connector; in Boot mode it is used on the control-unit connections as specified by the protocol instructions.
• It forms the main link between KESS3 and the control unit for identification, read, write and supported programming operations performed without the OBD socket. Available functions depend on the selected ECU/TCU, active protocol and licence scope.
• Used together with the 144300KTER extension cable set for connection to different control-unit pins. Power required for bench work must be supplied via the KESS3 power supply or a suitable regulated laboratory PSU, according to the protocol.
• The cable does not program on its own; use requires an Alientech KESS3 ECU programming tool, the correct protocol, wiring diagram and a valid licence.

Key Features:

• Product code: 144300KBNC
• Compatible tool: Alientech KESS3
• Connection modes: Bench and Boot
• Target units: ECU and TCU
• Direct control-unit connection
• Compatible with the 144300KTER extension set
• Original Alientech accessory for professional ECU/TCU programming workshops

Applications:

• ECU and TCU applications supported by KESS3 in Bench or Boot mode
• Control-unit identification, read and write operations
• ECU/TCU backup, recovery and supported cloning operations
• Passenger car, light commercial, truck, motorcycle, agricultural and marine control units

Complementary Products:

• 144300KTER: Multiwire extension and connection lead set
• 1400K3ALIM: KESS3 bench power supply

Package Contents:

• 1 x Alientech KESS3 Multiwire Bench/Boot cable — 144300KBNC

Note: The KESS3 tool, 144300KTER extension set, power supply and software licence are not included. Before any operation, always check the wiring diagram, required accessories and pinout in the protocol guide inside Alientech Suite.