Autool CT60 Fuel Injector  and Signal Generator

Autool CT60 is an injector tester for testing stuck, leaking or burning in fuel injectors.

By connecting two nozzles, you can operate and compare the injection angle and the injection process in the fuel injector at the same time.

You can set multiple pulse outputs, pulse speed/width and other operations in Autool CT60 tool.

Autool CT60 Fuel Injector  and Signal Generator  Features:

I.Standard fuel injection nozzle type: that is, the automobile naturally aspirated fuel injection nozzle, the DC voltage 12V can drive the solenoid valve in the fuel injection nozzle.

II.Types of high-pressure fuel injectors: the turbocharged fuel injectors for automobiles, the instantaneous voltage of 75V can drive the solenoid valve in the fuel injector.

III.Wide operating frequency range: The operating frequency range can reach 600~6000 rpm.

IV.Working time range: The working time setting range can reach 0~99 minutes.

V.LCD display: working frequency and time are digitized for more precise adjustment.

Operation Process:

    • Turn off the vehicle's engine and remove the fuel injectors from the engine.

    • Connect the pulse output to the power input port on the fuel injector.

    • Connect the positive and negative electrode clamps to 110V/220V power.

    • Press RPM "+" "-" to select required analog speed. Press the "Start" button, then the device starts to work.

    • Select the required injector.

    • Put the device on the coupling equipment, and then press the carburetor cleaner.

    • Press the RPM "+" and "-" keys, the tester will pulse the injector, and then the pulse signal indicator will light up. The device will start working.

    • Use self-pressure detergent, you need to choose the corresponding connector and connect it well. Press the start button to start spraying and observe the spray ability status and spray angle with your naked eye.

Necessary Precautions:

    • Make sure the car engine must be turned off before using this device.

    • Do not smoke or use lights near the vehicle.

    • Do not spill vehicle fuel on hot engine parts.

    • Only operate this device in a well-ventilated place.

    • DO NOT approach the rotating parts of the vehicle and DO NOT touch the heated parts of the vehicle.

    • DO NOT touch any car parts with the dangerous voltage logo.

    • Wear quality glasses.