Description
Launch CRP 919X BT Diagnostic Tool
Launch CRP 919X BT is an innovative, powerful universal diagnostic tool designed to diagnose faults in complex vehicle electronic systems accurately and quickly.
Developed for the efficiency and accuracy that professionals and enthusiasts need in vehicle maintenance and repair.
With an MTK chip, expanded memory and battery capacity, this device offers up to 5x faster, smoother operation than other OBD2 scanners.
Up to 99% vehicle coverage, frequent software updates and an extensive database help CRP 919X BT outperform most rivals.
Technicians and DIY users gain deep vehicle health analysis and the ability to handle complex repairs.
Original Launch CRP 919X BT is compatible with DoIP and CAN FD protocols and includes a DBSCar VII VCI connector.
Also includes 2 years of free updates and one-click WiFi updating.
Bluetooth wireless connection lets you move freely in the workshop and run remote diagnostics on the vehicle.
Main functions include full system diagnosis on post-2020 FCA vehicles via AutoAuth, ECU coding and bi-directional control for active tests.
In short, Original Launch CRP 919X BT is a user-friendly, high-performance diagnostic tool that saves time and cost for technicians and owners.
Launch CRP919X BT Specifications
Operating system: Android 10.0
Processor: 2.0GHz, quad-core
Memory: 4GB
Storage: 64GB
Display: 7 inch LCD
Resolution: 1024 * 600
Camera: 8 megapixel rear
Wi-Fi: 2.4GHz
Battery: 6300mAh
LAUNCH CRP919XBT performs all major advanced service functions including Oil Reset, SAS, EPB, BMS Reset, DPF, ABS Bleeding, Immobilizer (basic), Transmission Reset, Suspension Reset, Injector Coding, AFS Headlight Reset, TPMS Reset, Gear Learning, AdBlue, A/F Reset, EGR Reset, Coolant Bleeding, NOx Reset, Language Setting, Transport Mode, Seat Calibration, Throttle Adaptation, Tyre Setting, Power Balance, Stop/Start, Window Calibration, AC Relearn, High Voltage Battery Diagnostics, GPF Reset, ICCS Reset and more.
What are these functions?
1. ABS Bleeding
Bleed the brake system when air is present in the ABS to restore brake sensitivity.
2. TPMS Reset
Reset tyre pressure after low pressure, leaks, sensor replacement or tyre change to clear the TPMS warning light.
3. Oil Service Reset
Allows the engine oil life system to recalculate after an oil change.
4. Electronic Throttle Reset
Initialise the throttle actuator so the ECU learning value returns to default.
5. Injector Coding
Verify or recode each cylinder injector after ECU or injector replacement.
6. SAS Reset
Clears steering angle sensor memories and resets calibration.
7. Brake Pad Reset
Disable and enable brake systems, assist brake fluid checks and adjust brakes after pad or disc replacement.
8. Gear Learning
Perform gear learning after crankshaft position sensor or flywheel replacement.
9. IMMO Service
Match remote keys to the immobiliser so only authorised keys can start the vehicle.
10. Battery Matching
Reset the battery monitoring unit and clear stored low-battery fault data.
11. DPF Regeneration
Clean PM from the DPF filter via continuous regeneration oxidation, especially on diesel particulate filter systems.
12. EGR Adaptation
Relearn the EGR valve after cleaning or replacement.
13. Suspension Matching
Calibrate body height sensors on air suspension after module replacement or incorrect ride height.
14. NOx Sensor Reset
Reset learned catalyst values in the engine ECU after NOx faults or catalyst replacement.
15. Tyre Reset
Adjust size parameters after tyre replacement.
16. Window Calibration
Perform door window matching to restore ECU initial memory.
17. Stop/Start Reset
Enable or disable automatic stop/start via hidden ECU functions where supported.
18. AC Initialisation
Relearn the AC system after ECU, actuator or memory loss.
19. AdBlue Reset
Perform urea reset after diesel exhaust fluid replacement or refill.
20. AFS Headlight Reset
Initialise the adaptive front lighting system.
21. A/F Reset
Adjust or learn air/fuel ratio parameters.
22. Transmission Reset
Complete transmission self-learning to improve shift quality.
23. Coolant Bleeding
Activate the electric water pump before bleeding the cooling system.
24. Transport Reset
Disable transport mode to return the vehicle to normal operation.
25. Seat Calibration
Match memory seats after replacement or repair.
26. High Voltage Battery Detection
Diagnose high-voltage battery status on hybrid and electric vehicles.
27. Sunroof Initialisation
Configure sunroof lock, rain close, memory and temperature threshold settings.
28. Engine Power Balance Monitoring
Monitor crankshaft acceleration per cylinder to determine relative power contribution.
29. Language Change
Change the vehicle centre console system language (language pack required).
30. Gasoline Particulate Filter (GPF) Regeneration
Replace or regenerate the GPF after increased fuel consumption or reduced power.
31. Adaptive Cruise Control Reset
Match the adaptive cruise module after replacement or repair.
(Note: Available maintenance functions vary by vehicle brand, year and model.)
Launch CRP 919X BT Diagnostic Tool Package Contents
Launch CRP 919X BT Tablet
DBSCAR VII Vehicle Connection Hardware
OBD conversion cable from DSB CAR interface
UK, US and EU plug adapter
User manual
Power adapter
Universal PIN envelope
Quick start guide
USB to Type-C cable
Reviews
Be the first to review this item
There are no reviews yet
