Electromem Flash-Mem 100 Voltage stabilization device, produced in Italy, is a battery test and stabilization device.
Many function adjustments can be made on the device. If the vehicle is being flashed, selections are made on the device, or if you only want to charge your vehicle's battery, you can set the charging part and perform the charging process.
You can do this by depending on the vehicle's engine and battery values, depending on the vehicle characteristics.
The 10 amp small charge in the device can be left so that the battery is not discharged.
30 amp normal charge
60 amp fast charge
We can change the values as 150 amps high charge.
The stabilized voltages are 13.8 volts, 14.4 volts and 14.8 volts. For example, if a vehicle is being programmed, the values we want to fix should be 14.4 volts.
Otherwise, interrupting or interrupting this process may cause the vehicle to crash or cause major damage.
Flashmem 100 Battery fixing device is equipped with microprocessor and cpu controller for both human health and vehicle safety
.
On the screen on the left side of the device, you can have information about the status information.
When this device is connected to the vehicle, it starts to perform the battery test automatically. If the battery is charging, it shows the warning in the charging section.
If the battery is inserted and there is a malfunction in the battery, the malfunction light on the device turns on. In addition, if the battery is full, it gives a full warning.
Features of Flash-Mem 100 Battery Fixing Device
Input Voltage 90-260V w 1500 output 12v 10-100 Amps
Charge capacity 10-1000 ah
Device size is 350x450x150mm
Device weight is 8.2 KG
Supported accumulators: Agm Lithium LiFePO4