One Diagnostic Tool for Your Entire Fleet with Jaltest
Jaltest is a multi-brand diagnostic system that offers a complete solution for all commercial vehicle diagnostic requirements.
With its ability to present detailed technical information in a simple and easy-to-use way, the Jaltest diagnostic tool is an important heavy-duty diagnostic device in modern workshops today.
It is an advanced self-guided diagnostic tool.
It can scan vehicle systems, display fault codes, view photo sensors and ECUs, locate parts, and much more.
It also provides technical information such as wiring diagrams, brake lining thickness, clutch thickness, ride height, oil capacity, and many other factors.
Jaltest is more than a diagnostic tool; it is a heavy-duty diagnostic device that functions like a complete hospital.
SOME OF WHAT YOU CAN DO WITH THE JALTEST MULTI-BRAND DIAGNOSTIC TOOL;
DIAGNOSIS
Allows reading the ECU fault memory by providing user information about the fault codes received.
This function allows the user to clear fault memory; if the fault is still present, it will be detected again by the ECU.
You can easily resolve detected fault codes with the guidance provided.
MEASURED VALUES
Displays values from different sensors connected to the ECU on screen.
ECU DATA
In this section you can find technical data for each ECU connected to the system, such as serial number, software version, and manufacturer reference.
COMPONENT ACTUATOR
These are direct tests that can be performed with system components.
For example, you can run an ABS modulator, activate suspension, and similar tests to determine whether there is a fault in that component.
Solenoid valves, raising or lowering the vehicle chassis... This is a diagnostic procedure used, for example, to perform engine tests.
You can calibrate the balance of cylinders connected to each system, cylinder cut-off, or compression status.
CALIBRATION
Some systems require certain components to be calibrated for correct operation. The best example is electronic suspensions;
Note: reference values must be stored for the ECU to function correctly.
PARAMETERS
Some control units operate with different settings. With this option, it is possible to copy settings and parameters to the control unit.
This way, control units can be programmed during initial setup. In some systems, changes are also possible.
RESET
This refers to resetting maintenance control unit counters. If maintenance is performed but the maintenance alarm is not reset, the maintenance warning message will continue. Stored fault codes that are part of diagnostics will also remain illuminated.
WIRING DIAGRAM
You can easily view the detailed diagram and schematic of the system, including configuration, components, fault codes, and additional information about fault codes that facilitates diagnostics.
SYSTEM TECHNICAL INFORMATION
You can view the system's technical information showing control values, descriptions, graphs, and charts.
To view similar products Click here
