Which Device Should I Use to Stabilize the Battery During Online Programming on Passenger Cars?
In the repair sector, a new problem can emerge every day. One of these problems is the need to reintroduce and program a module or replaced part when it is not working in the vehicle.
Especially on vehicles such as BMW and Mercedes, this need is addressed through online programming operations.
We perform this process using diagnostic tools with online programming capability.
Online programming is carried out with high-end, professional diagnostic tools.
At the start of the process, the device connection is established, the system is accessed through the application, the vehicle is registered, and the module or control unit to be programmed is selected.
Programming must be performed with the ignition on.
What Should You Pay Attention to When Performing Online Programming on Vehicles?
Because online programming is done with the ignition on, it consumes a lot of energy, so the battery must be in good condition and voltage must remain stable.
During programming, the voltage value should be around 13.1V. Otherwise, the process may stop midway, and if voltage is lost, serious problems such as vehicle ECU failure may occur.
Which Device Do We Use to Stabilize Battery Voltage?
There are many devices on the market for battery voltage stabilization. One of them is the Topdon Battery Stabilizer and Charger Tornado 90000 from Nitro Mekatronik, the official distributor.
Topdon Battery Stabilizer and Charger Tornado 90000 is a next-generation device.
With a range of 5 to 90 amps, this device is suitable for all 12-volt and 24-volt batteries. With its 9-step charging method and 6 charging modes that always deliver the correct current and voltage output, it provides the necessary protection for batteries.
The SUPPLY mode on the device provides DC current to users and can also be used as a voltage stabilizer.
Topdon Battery Stabilizer and Charger Tornado 90000 can also be used as a power supply for many vehicles. Because it is compatible with AGM, WET, GEL, MF, CAL, and EFB 12V and 24V batteries, it can also be used to charge these batteries.
Topdon Battery Stabilizer and Charger Tornado 90000 and other Topdon devices—contact us at 08507550230 for detailed information.