The most effective way to measure vehicle performance is through active tests.
Active testing means correctly analysing the functionality of a running vehicle's engine.
Correct evaluation of the engine's horsepower and torque, the most important part of the vehicle, and transmission shift performance from the transmission to the engine ECU gives us accurate information about vehicle performance.
Devices have been produced for these operations. These devices correctly analyse and present vehicle speed, acceleration, engine horsepower, torque and pulling power.
Services and auto appraisal firms have dynamometer devices. These devices are costly and also take up a lot of space. In addition, they require many procedures before testing.
For example, chaining the vehicle, placing an efficient fan in front of it, and computer monitoring are regarded as quite tedious operations.
For this reason, Dynoroad, offered for sale in the Turkish market with Nitro Mekatronik assurance, has become the most preferred device because it can perform the same job with a much smaller device and, more importantly, at a very low cost.
Its use and installation are so simple that even end users, in other words drivers, can measure their own vehicle performance without going to a service or appraisal firm.
Dynoroad used with an application downloaded to a tablet or mobile phone provides complete and the healthiest performance information with real driving in open areas.
All you need to do after downloading the application is turn on Dynoroad and analyse the data coming to your tablet or phone.
Dynoroad lets you test vehicle performance in a real-life scenario. It also allows you to report the data you receive according to your needs. It offers comparative analysis.
Dynoroad works as follows.
First, Dynoroad is mounted on the wheel on the non-driven axle.
After the device is mounted correctly with the supplied connection adapters, it is turned on from the on/off button. After it is turned on, the status LED starts blinking.
After these stages, connection is made to the application downloaded to the phone or tablet.
After the seat belt is fastened, the vehicle is started and activated via MagicMotorsport.
On the first screen, test parameters are configured and vehicle information is entered.
Then calibration is performed by maintaining 40 km/h for 20 seconds. After calibration, Dynoroad is ready for initial data.