Magicmotorsport Flex EDC7UC31 How to read and write Ecu?
What is the chip tuning process?
The system that provides performance increase by reading and changing the software in the control units of vehicle engines that came out of the factory as zero and have normal values is called chip tuning.
By performing chip tuning, we can change many values of the vehicle and make it perform better. Cars leave the factory with the performance of standard data.
Power and torque limitations of chip tuned vehicles are eliminated and fuel consumption is reduced to a minimum accordingly.
Chip tuning was used to change the ignition software in the engine in the past, but the developing technology is now done to increase the performance of the engine.
There are many detailed processes such as ambient temperature, air pressure control and fuel injection on the chips in the vehicles.
With the software changes made, the software information on these chips will be changed with chip tuning devices and will have its new status.
Chip Tuning Process Is Suitable For Which Style Engines?
Chip tuning is more suitable for turbo gasoline or turbo diesel vehicles and is applied according to these engines. It provides an average 20-25% increase in performance and fuel savings.
In addition, these operations do not cause the vehicle to be out of warranty.
Magicmotorsport Flex EDC7UC31 How to read and write Ecu?
Magicmotorsport is a world famous company. It not only performs chip tuning for vehicles, but also performs operations such as DSG transmission coding, EGR solutions, DFP solution, Immo Solution.
Magicmotorsport Flex device is offered in two packages as Slave and Master. If you purchase a slave package, you are connected to a dealer and you can perform your transactions by sending your files to the dealer you are connected to.
When you buy a master package, you can write your files yourself, freely connect to the dealer you want or give yourself dealerships.
You must first establish a connection to the EDC7UC31 computer with your flex device. The system will show you the port you will install. For example via OBD or Bench connection.
After making the connection, you will see a connection diagram on how to connect your device to the ecu in the program. The links will be shown to you in pictures in the Flex program.
The right connections you make will enable you to communicate with the ecu .
You can download your files in the section you connect, perform the necessary arrangements and software operations, and rewrite them with the flex program you log in to the vehicle.