Jaltest is a multi-brand diagnostic system that provides a complete solution for all commercial vehicle diagnostic requirements.
With its ability to present detailed technical information in a simple and easy to use way, the Jaltest diagnostic device is an important heavy vehicle fault detection device in today's modern workshops.
It is a fully self-help advanced diagnostic tool. It has the ability to scan vehicle systems, view error codes, view photo sensors and ECUs, locate parts and much more.
It also provides technical information such as brake thickness, clutch thickness, road height, oil capacity and connection diagrams such as many factors.
Jaltest is more than a diagnostic tool; It is a heavy vehicle fault detection device that functions as a complete hospital.
SOME OF WHAT CAN BE DONE WITH JALTEST MULTI-BRAND DIAGNOSTIC DEVICE;
DIAGNOSIS
It provides user information about the error codes received and allows the ECU to read the fault memory.
This function allows the user to clear the memory of errors; If there is an error, it will be detected again by the ECU. You can easily solve the detected fault codes with the guidance below.
MEASUREMENT VALUES
Displays the values of different sensors connected to the ECU on the screen.
ECU DATA
Technical data of ECU connected to each system, serial number, software version, manufacturer's reference etc. You can find information such as in this section.
COMPONENT ACTIVATOR
These are direct tests that can be done with system components. For example, you can run tests such as running an ABS modulator, activating the suspension.
This way you can find out if there is any malfunction in this component.
Solenoid valves, to raise or lower the vehicle chassis ... This is a diagnostic procedure used to perform engine tests, for example.
You can calibrate the state of the cylinders connected to each system, such as the balance, cutting or compression of the cylinders.
CALIBRATION
Some systems require some components to be calibrated for correct operation. The best example is electronic suspensions;
Note: In order for the ECU to function correctly, reference values must be kept.
PARAMETERS
Some control units work with different settings. With this option it is possible to copy settings and parameters to the controller.
In this way, it will be possible to program the control units at the first installation. In some systems, it is possible to make changes.
RESET
This point refers to the reset of the maintenance control units counters. If the maintenance alarm is not reset even if maintenance operations are carried out, the warning message regarding maintenance will continue. The memory that is part of the diagnostic will continue to light up, along with the error codes.
CONNECTION DIAGRAM
You can easily see the detailed diagram and diagram of the system, which includes additional information about configuration, components, error codes and error codes, which facilitates diagnostics.
SYSTEM TECHNICAL INFORMATION
You can see the technical information of the system showing control values, explanations, graphics, charts.