One of the most serious problems faced by earthmoving transport trucks is the ground problems in the excavation dump areas.

Problems encountered in excavation casting areas

The occurrence of collapses due to the weakness of the ground structure

Tilting due to malfunctions related to the systems in the earthmoving truck and problems in its tires

Disconnection of the front part of the vehicle with the ground due to the load balance change due to the opening of the damper cover during the excavation unloading of the truck.

Moving the vehicle with the damper open can also produce unexpected results.

As Nitro Mechatronics company, we offer the Atem Damper Stop device to the service of users in order to eliminate these problems.

Atem Damper Stop Device Operating System: Atem Damper Stop uses a 2-axis inclinometer module to provide inclination measurement. Thanks to this module, it transmits the system optimization process to the microprocessor by measuring the side and vertical slope of the damper / chassis. When it sees the slope information entered into the system at first, it automatically sends a download request to the system. After this request, it is aimed to maximize the safety level by sending a visual and audible warning message to the driver. In addition, apart from the slope optimization of the device, the damper is automatically lowered when the vehicle has a certain acceleration tendency.

The Atem Damper Stop Device Operating System has been equipped with many different systems and has been adapted to all ground conditions and external factors. Equipped with these and many other similar features, the Atem Damper Stop Device has managed to minimize the problems that may occur due to drivers or external factors. In this way, possible accidents, loss of life and monetary losses are prevented.

Atem Damper Stop Device Working System and Features:

Horizontal Slope Measurement:

1. Before starting the casting process of the truck coming to the excavation dumping area, the Atem Damper Stop System evaluates the ground slope and if it evaluates that the slope values ​​are not suitable for tipper lifting, it will not allow the tipper to lift. In this way, possible tipping and collapsing processes are prevented.

2. Even if the excavation casting process begins, Atem Damper Stop Device continues to control the ground slope. Depending on any balance problem that may occur, the device system activates and sends a warning to the driver visually and audibly, and it is ensured that accidents and damages that may occur are prevented.

Vertical Tilt Measurement:

1. Before starting the casting process of the truck coming to the excavation dumping area, it evaluates the upward or downward slopes according to the vertical ground slope ratio, and if there is any risk as a result of this evaluation process, it does not allow the damper to be active.

2. Even if the excavation casting process begins, Atem Damper Stop Device continues to control the ground slope. Depending on any balance problem that may occur, the device system activates and sends a warning to the driver visually and audibly and it is ensured that possible accidents and damages are prevented.

Damper Cover Switch and Cover Opening Control:

1. After the excavation unloading process of the damper starts, the desired angle is waited for the opening of the cover defined on the device. Angle synchronization is controlled by the Atem Damper Stop Device, in other words, it prevents the cover from opening at a different angle. In addition, thanks to this device, you can update your vehicle's damper opening control angle.

2. Cover switch The cover is controlled with the switch installed on the dump covers of Earth Moving Trucks. In this way, whether the cover is opened or not is kept under control. In addition, if the door is not opened in line with the specified limits, the device sends a call to lower, preventing any load imbalance that may occur. In this way, the front of the vehicle is prevented from rising from the ground by preventing sudden movement towards the rear.

Speed ​​Limitation: It provides speed control between the device and the vehicle with the Atem Damper Stop Device, and allows the damper to automatically descend when the specified speed limit is reached.

Configurable: Atem Damper Stop Device It is a device that can be updated and offer options according to your safety needs, conditions in the work area, vehicle and tipper features.

In-Cab Connection: With the connection established between the driver's cabin and the device, you can actively update the device operating system from inside the cabin and control the damper safety status.

Device Structure: As the Atem Damper Stop Device device will be used in heavy and harsh conditions, it is produced in a water-resistant and impact-resistant structure against damage caused by external factors.

Atem Damper Stop Device is one of the most serious problems that earthmoving truck drivers have experienced and the consequences can be severe. Damper Stop device has relieved the drivers' hands on the way to prevent the problems that may occur due to damper balance problems, opening and closing.

For more information about Atem Damper Stop Device, you can get information from 0850 755 02 30 or visit Nitro Mechatronics branches.