CT200 Injector Cleaning and Tester

CT200 device is an injector cleaning and testing device that combines ultrasonic cleaning, oil pressure controlled cleaning and inspection technology in one device.

The device can test 6 injectors at the same time, which saves your time. It also supports injectors of most cars and motorcycles on the market.

The CT200 has been a highly preferred device since its release.

CT200 Injector Cleaning and Tester Features:

• It contains 12 special functions for the Injector:

1- Ultrasonic vibration is used to completely remove the dirt inside the injector.

2-Simulates engine idle speed and tests injector condition.

3-It simulates the engine running at medium speed and tests the injector status.

4-Simulates a high-speed engine and tests the injector condition.

5-Simulates the acceleration of the vehicle and tests the injectors.

6-Simulates the gear change of the vehicle and tests the injector performance.

7-Tests the leaking condition of the injector.

8- Simulates the engine at idle and tests the spraying status of the injector.

9-Simulates the engine at medium speed and tests the spraying status of the injector.

10-Simulates the engine at high speed and tests the spraying status of the injector.

11- Thanks to the backwash feature, the test liquid flows from the outlet to the inlet. With this feature, the dirt inside the injector can be cleaned.

12-You can clean the injectors without disassembling them.

• You can reuse the cleaning fluid:

The liquid used in the cleaning or testing process can be used again later.

• You can measure the pressure:

You can monitor the pressure so that the damage caused by the pressure does not occur.

• You can see the test level:

You can clearly see the amount of liquid.

• You can test the injectors literally:

You can test the uniformity of the injection quantity of the injectors.

You can test the spraying status of all injectors.

You can test the leak condition of the injectors.

Together with the CT200 injector cleaning and testing device, you can simultaneously clean and test 6-cylinder injectors.

How does the CT200 work?

Ultrasonic cleaning feature

• Fill the cleaning fluid and replace the injectors.
• Connect the signal lines and start the device.

CT200 Injector Cleaning and Tester Feature:

• Fill the test liquid and assemble the injectors.
• Then you can test the injector.

Package Included:

• 1 CT200 injector cleaning and testing device
• 1 funnel
• 1 ultrasonic cleaning apparatus
• 2 drainage valves
• 2 fixing bars
• 2 fixing nuts
• 6 backwash attachments
• 6 adapter cables
• 1 power cable
• 1 oil separator
• 6 injector gaskets
• 5 oil separator special plugs
• 1 ultrasonic cleaning cloth
• 1 user manual