Skip to main content
📱 📱 Tamirhane mobil uygulaması yayında — Tamirciler ve araç sahipleri için İndir 📱 📱 Tamirhane mobil uygulaması yayında — Tamirciler ve araç sahipleri için İndir 📱 📱 Tamirhane mobil uygulaması yayında — Tamirciler ve araç sahipleri için İndir 📱 📱 Tamirhane mobil uygulaması yayında — Tamirciler ve araç sahipleri için İndir 📱 📱 Tamirhane mobil uygulaması yayında — Tamirciler ve araç sahipleri için İndir 📱 📱 Tamirhane mobil uygulaması yayında — Tamirciler ve araç sahipleri için İndir
Excavator AdBlue Fault Solution
Friday, May 20, 2022

Excavator AdBlue Fault Solution

Euro 4, Euro 5, Euro 6 heavy-duty vehicles (trucks, tractor-trailers, construction machinery, buses) AdBlue systems are resolved by connecting with an emulator or ECU programming device.

The procedures applied vary from vehicle to vehicle. As a result of this applied procedure, no harm is done to the vehicle.

When SCR, DPF, and NOx sensor faults occur, the vehicle loses pulling power and speed limiting occurs. Speed limiting will increase fuel consumption.

Providing temporary solutions is both difficult and costly. In this case, AdBlue solutions can be performed with less costly and definitive solutions using emulators or ECU software support.

Different applications are performed for each vehicle for AdBlue solutions. During AdBlue solutions, the system must be renewed, existing problems must be resolved during the renewal, and most importantly, the application must be completed without harming the system.

After the AdBlue problem is eliminated, substances emitted from the exhaust are made harmless. AdBlue is known as a liquid substance and has been integrated into vehicles by manufacturers to reduce the NOx level in exhaust gases. With the help of AdBlue fluid, gases are expelled from the exhaust harmlessly.

After excavator emulator use, a vehicle giving AdBlue and NOx errors can continue use from where it left off after the AdBlue system is disabled. The NOx sensor is located in the exhaust section on excavator vehicles.

Because the NOx sensor is located in the exhaust section, it can frequently cause problems. Sensor failure can cause serious problems on the AdBlue system.

When a problem occurs, the vehicle runs but cannot reach sufficient torque and power. Our emulator device can help you eliminate these problems.

Thanks to excavator AdBlue emulators, errors occurring in NOx sensors can replace temperature sensors and the DPF filter.

AdBlue faults occurring on excavator vehicles in heavy working environments can put us in a difficult situation both financially and in terms of time loss.

The Excavator AdBlue Emulator device will help eliminate problems in the vehicle.

Video Explanation

An example of our AdBlue and DPF work on construction machinery:

Leave your comment