How Is a Steering Column Lock Fault Resolved?

How Is a Steering Column Lock Fault Resolved?

Many vehicle users have experienced a steering column lock fault. Sometimes when we want to start the vehicle, we cannot insert the key into the ignition. Although this situation can cause panic, it is actually a small anti-theft measure taken by manufacturers.

As mentioned earlier, vehicle manufacturers have taken certain precautions against theft when the driver leaves the vehicle. Immobilizer, alarm systems, and steering lock systems are defined as anti-theft systems that prevent the vehicle from being stolen while parked.

These systems prevent the steering wheel from turning when the vehicle key is not in the ignition and cause the steering wheel to lock after a certain point.

The steering wheel can also lock under normal conditions. So why does it lock?

• Holding the steering wheel while stopping the vehicle or getting in,
• Your knee touching the steering wheel before inserting the key into the ignition,
• And any problem in the vehicle also has a high probability of triggering this issue.

In such situations, you can use the BMW steering column lock emulator that we sell at Nitro Mekatronik.

The steering column lock emulator, a very simple and practical product to use, can quickly resolve problems that occur in vehicles thanks to ELV modules.

How can we use the steering column lock emulator?

We remove the 4-pin connector from the ELV,

Then we connect the connector to the steering column lock emulator,

We turn the ignition and start the vehicle,

If no problem occurs during emulator connection, the LED lights once.

If a problem occurs during steering column lock emulator connection, the LED will blink continuously.

The Steering Column Lock Emulator is compatible with BMW E60, E87, E90, and Mini Cooper models.

If no problem occurs after the emulator connections are made, there is nothing else that needs to be done. It will become active after connection.