You can reprogram the engine and transmission control units of many vehicles, thanks to the Flex programming device developed by Magicmotorsport firm.

Magicmotorsport, which makes revolutionary moves in the chip tuning sector with its fast updates and software protection, will be able to easily communicate with new generation vehicles thanks to the flex device developed for today's technology, and at the same time offer a safe and fast platform to its users. 

You can customize your Flex device by choosing software packages and accessories according to your needs.

Thanks to the Flex device, you can read and write most of the vehicle ecu on the market from the OBD socket of the vehicle .

You can use Flex's BDM, Bootloader, JTAG and AUD motives for ecu repair and other jobs that require expertise.

Thanks to its useful and flawless design, the device minimizes connection and communication errors.

The OBD software package will be released soon.

FLS0.10M - Software Flex BL Tricore + Bench Bosch MEDC17 - MASTER

Thanks to the MEDC17 software package, you will now be able to read empty MEDC17s easily without opening the ecu, so you are no

longer at risk of harming the MEDC17 ecu. FLS0.2M - Software Flex TCU - MASTER

Thanks to the Flex TCU Master software package, you will be able to read and write the TCU (transmission ecu) in full, and you do not need to open the transmission ecu during this process.

Tuning, Align, Paypass, Backup editing is no longer a problem.

The difference of this software is that it works quickly and without a password.

Reading times were tested between 2 or 3 minutes in total, depending on the ecu models.

Writing times, on the other hand, were measured as 9 minutes, depending on the change in the file. FLS0.3M - Software Flex BDM MPC5XX - MASTER

Flex BDM MPC5XX software package allows you to read and write all files in the ecu in full format without any encryption.

This protocol works much faster than any BDM device on the market.

Tuning matching backup editing is no longer a problem and can be done in a few seconds.

Reading and writing shadow memories (internal flash reading) is now possible in this software. Reading time is approximately 1 minute in total.

This time varies according to the ECU model.

The write time does not depend on the actual size of the modification,

while the write time is fast enough. You can finish the cloning process in less than 2 minutes.

Moreover, if you already have the MagproBDM apparatus, this protocol will be provided free of charge to you.

FLS0.9M - Software Flex JTAG NEC 76F00X - MASTER

This software package allows you to fully read and write NEC 76F00X ecu.

Other device manufacturers call this package the Jtag Nec7600x, and this protocol is very important for everyone's daily work and will speed up your work.

It is a protocol that will speed up your work, especially in the Toyota group.

Tuning cloning, backup editing is no longer a problem and you will be able to do it in a very short time.

 Reading time tested approximately 1 minute. The writing time is usually less than 2 minutes.

If you own your X17 device, this protocol will be provided to you free of charge.