Dynoroad Portable Vehicle Dyno

A fast, easy and inexpensive chassis dynometer made to test the performance of your vehicle

DynoRoad is an innovative mobile car dynamo that can be installed on your mobile phone or tablet and can measure power and torque in both electric cars and regular cars.

This dyno is so small and compact that you can always carry it with you and you can mount it on the car in just 2 to 3 minutes and perform your operations.

Thanks to Mobile Dynoroad, you do not need to occupy a space in your workplace, and you do not need to spend as much as a high-cost fixed dyno.

Robust Design

The lightweight yet durable DynoRoad is made of a solid aluminum body designed to maintain its rugged features and ensure the longevity of the device.

Long Life Battery

Don't be in a hurry with your car tests. Our integrated battery can take the many measurements you need, thanks to its comprehensive battery life of up to 10 hours of runtime.

Internal Paid

Fully portable, DynoRoad is equipped with an internal battery that allows you to perform various tests on the go and includes a USB Tpye C port for charging.

High Accuracy

With its built-in sensors and sophisticated algorithms, your results will be very robust, especially since you can now test your car in real-life scenarios - on the road.

Car Dyno Testing Is No Longer A Problem

With DynoRoad, measurements are extremely accurate and can only be repeated by entering the correct vehicle weight and tire dimensions. In addition, this car dynamo has an integrated weather module that allows you to measure ambient temperature and atmospheric pressure.

DynoRoad allows you to repeat results consistently under similar conditions with less than 1% margin of error.

Accessory bag

After purchasing the Dynoroad portable dyno, you do not need to purchase any additional parts for installation. The device is sold in a full package and you can also use it as you wish without any restrictions.

Note that this device is designed for long-distance use and is not used on public streets or in open areas.

Very Easy, Very Fast, Very Accurate

Using Dynoroad is as easy as mounting the dyno to the wheel of the vehicle, pressing the Power button and pairing it with the mobile device.

Fasten your seat belts and start your engine. Once you have activated your car dynamo with a Magicmotorsport account, you will need to enter your car details to make accurate measurements.

You can quickly calibrate the DynoRoad by maintaining 40 km / h for at least 20 seconds.

When the calibration is successful, car dynamics is ready to go.

Smart Mobile Application

DynoRoad's application software user interface is simple and intuitive, designed for anyone who knows how to use a mobile phone.

The app guides you through the initial setup of the dynamo and gives you clear and understandable options for accurately measuring your car's horsepower and torque, but you can also analyze and compare the results of these measurements.

Measure vehicle power in a real life scenario

Customize your reports according to your needs

Analyze your metrics

Compare your change results

Frequently Asked Questions

What is a dynamometer?

A dynamometer, or dynamometer for short, is a device for measuring force, moment of force (torque) or power. For example, the power generated by a motor, motor or other rotating prime mover can be calculated by simultaneously measuring torque and rotational speed (rpm).

How does a dyno test work?

Setup

First, attach the DynoRoad to the vehicle wheel on the non-drive axle.

After mounting the dynamometric probe with the connections provided, press the ON / OFF switch.

After pressing the ON / OFF button, the white STATUS LED flashes.

From this moment on, it will be possible to connect the car dynamo to the App and be guided in power tests.

Fasten your seat belt and start the engine: After activating the device via the MAGICMOTORSPORT account, the configuration will be started.

On the first screen, configure the measurement by specifying the parameters: name and brand of the vehicle, its size and mass, and the tire size.

Calibrate the car dynamo maintaining 40 km / h for at least 20 seconds. Once the calibration is successful, DynoRoad is ready for the first measurement.

Measurement

Measurement consists of two stages:

Stage 1. Acceleration

Phase 2. Automatic deceleration after idle. The second stage takes about 10 seconds. The program automatically announces the end of the deceleration phase with an audible signal.

Press CONTINUE to start measuring. The message "You can move" is displayed.

Vehicle power measurement is usually done at the third or fourth gear in the current engine speed range.

In order to calculate the correct torque and get the correct graph, then it is recommended to move at low speed, first and second gear, after engaging third or fourth gear, start measurement.

The application is also at 0

 Allows you to enter a very precise acceleration time up to 100 km / h, 200 km / h and drive for ¼ mile lengths where engine performance can be measured and evaluated.

Regardless of transmission type, the GO button and accelerator pedal will be in the same position.

After reaching the required speed or measuring range, the vehicle can be stopped.

Power values will be incorrect while braking, but the acceleration results will be correct and will automatically appear on the screen when a certain speed is reached along the road.