Today's vehicles are equipped with electronic systems. The most important of these is the ECU (Electronic Control Unit) engine control unit.
The other name of ECU is called engine ecu . The engine ecu is a unit with a microprocessor that controls all electronic components on the vehicle and the sensors on the vehicle.
When the ECU in the vehicles fails, it is quite costly to buy a new ECU. ECU in today's technology; It is used in vehicle groups such as passenger cars, light commercial vehicles, heavy vehicles, tractors, construction machines.
The ECU engine ecu determines the torque power produced by the engine by controlling the CAN LINE signals coming from sensors such as crankshaft sensor, air flow meter sensor, turbo pressure sensor to a large extent.
It prevents sudden power loss in heavy stresses. This system is used in all vehicles with electronic control units.
Since the inside of the ecu is equipped with a complex electronic integrated system, it is a difficult task to cause the malfunction in the ecu .
Ford Cargo ecu repair is now carried out in Nitro Mekatronik Garages.
As Nitro Mekatronik, we have been distributing, selling and after-sales technical services of fault detection devices and ECU programming devices in the automotive industry since 2009.
Since we know how difficult it is to detect the engine ecu malfunction, which is our field, we have managed to produce the ECUTEST KF-1500 ecu Test Device after long efforts.
You can perform injector test, crank and camshaft input test, immobilizer test and input and output test of all sensors on the ECU with the ECUTEST device that we have developed more and more every day.
How to Repair Ford Cargo ECU?
Ford Cargo ECU repair process; BOSCH EDC7UC31 engine ECU is used in Ford 1838 heavy vehicles.
With the ECUTEST device, the connection is made only through the pin ends without opening the ECU.
Then, after entering the EcuTest program with an e-mail address and password via an online system, the BOSCH EDC7UC31, which belongs to our Ford Cargo 1838 vehicle, is connected to the ecu and the test is performed with a simple interface as if testing it on the vehicle.
You can make the ECU connection via the socket belonging to the BOSCH EDC7UC31 computer or with the universal cable that supports all the vehicles provided with your ECUTEST device.
After making the socket connections, you can find the ECU errors by following the steps below.
All parameters of the vehicle are loaded during the ECU selection and the necessary information is automatically uploaded through the server.
Thanks to the database (created by Nitro Mekatronik) in the server of the ECU selected thanks to the program, the connection scheme of the sockets; will be displayed as photos and videos.
After the connection is made, the voltages, injectors, sensor and valve outputs that must be taken from the ECU will be reflected on the screen.
If there are errors in the ECU, the values in the parts with errors are shown in red.
When you hover over the errors shown in red, you can view them up to the part number on the diagram.
All you have to do is replace the faulty integral.
When the errors in the ECU are removed, it will automatically be seen that the red color is corrected on the screen.
With the ECUTEST device, you can view all the values on the simulated ECU, as if working with the vehicle. You can test on all moving sensors and parameters thanks to a button that acts as an accelerator pedal.
Also, with the ECU-Test device, you can see live values in the ECU.
Immobilizer, body, indicator, ABS etc. with the Engine Control Unit. matches can be made.
Instead of replacing the control units of vehicles, there is no need to repair and cost a new ECU.
With the ECU Tester, sensor input and output information, voltage values, required values, measured values can be displayed. The necessary analysis and triggers are made by sending a signal to the control unit via the simulator.