Would you like to reduce fuel and AdBlue costs in your vehicles by around 15%?
Under today's conditions, fuel and AdBlue costs in vehicles have increased significantly. As Nitro Mekatronik, we guarantee fuel and AdBlue savings in your vehicles and continue to offer smart solutions to you and your fleets.
There are many factors that affect fuel savings in heavy-duty vehicles. The main ones are:
- Having your vehicles serviced regularly
- Not leaving your vehicle running at idle for long periods
- Avoid unnecessary braking according to traffic flow
- Tire pressures must be checked
- You should keep your speed at an average level
- Increase your speed gradually
In addition to these, one important factor for fuel savings is having software, also called chiptuning, applied to your vehicle.
In heavy-duty vehicles, especially Mercedes trucks and dump trucks produced after 2020, fuel consumption averages 34 liters per 100 km. After chiptuning and emission solution software, this rate can drop to 28 liters per 100 km. Here is how we do this as Nitro Mekatronik.
Autovei ECU Programming Device We read and write the ECU via OBD or on the bench as Dflash and Pflash. After chiptuning and emission procedures are applied to the flash software, we write Dflash again from the write section.
Before the read/write operation, we remove the 40-amp fuse in the fuse box.
After the read/write operation is complete, we perform two parameterization steps with the Mercedes diagnostic tool.
1- We set the WGS ECU to no AdBlue option
2- From MS Maintenance, we mark particulate filter as none so regeneration does not occur in the ongoing process
3- After installing an empty canister on the exhaust system, you can start driving safely.
After these procedures, your vehicle's pulling power will increase, fuel savings will begin, and most importantly, your emission problems will be resolved.
To watch the procedure video, click here